This is a mini magnet power head with a controller designed to simulate ocean waves in your saltwater aquarium. It comes with a built-in LED display controller that allows you to mimic various flow modes, power, and frequency according to different times of the day. The power head is easy to install and detach, thanks to its magnet mount. It circulates water continuously in a 360-degree motion throughout the tank, creating an ideal ocean-like environment. The smart controller lets you customize the current according to your preferences. With its compact size, it’s easy to hide in your tank. The 1600 gph powerhead is suitable for 3-25 gallon aquariums, while the 2600 gph powerhead is suitable for 26-55 gallon aquariums.

Here are important notes to consider when setting up the wave maker:

1. When setting the wave mode to 4 (random mode), power and frequency adjustments are not possible. Examples include settings like 1040, 2040, 3040, 4040, 5040.

2. If you select wave mode 3 (constant stream), frequency adjustment is not available. Examples include settings like 5138, 5238, 5338, 5438.

3. If the powerhead runs in reverse, it indicates something is tangled inside. You need to remove it and clean the impeller.

4. Error code 7 indicates an obstruction in the impeller. Unplug the device, disassemble it, rotate the motor fan a few times, then restart it. Additionally, ensure the pump is placed 6 inches below the water surface, as shallow water can also trigger error 7.

Err7 code or pump stopped working:

Reason: This may be due to out-of-water protection or debris clogging the pump.
Solution: Remove the impeller, detach the fan with a screwdriver, and use pliers to pull out any debris. Rotate the impeller a few times, clean it thoroughly, and then restart the pump. Ensure the pump is submerged at least 20 cm deep underwater.

Err6 code:

Reason: This could be caused by a loose connection or damaged electric wire.
Solution: Check the wire connections for any looseness or damage. If necessary, replace the affected part of the pump.

Here’s a summary of the features and specifications of the Hygger Mini Powerhead Controller:

**Customizable Current:**

– The built-in controller allows you to mimic ocean waves by adjusting flow modes, power, and frequency according to different times of the day, creating an ideal natural current for coral growth.

**Smart LED Controller:**

– The LED display controller enables you to set pulse strength, wave modes, and an auto-off feature for a 10-minute feeding mode.

**Quiet Operation:**

– This 12V DC powered wave maker operates quietly due to its energy-efficient magnetic propeller and motor, improving water quality and eliminating dead spots in the tank.

**Magnetic Mount:**

– The strong magnet suction cup base facilitates easy positioning anywhere in the tank, simplifying installation, adjustments, and removal.

**Suitability:**

– Designed for tanks ranging from 5 to 30 gallons, the DC Mini Powerhead measures 1.8×1.8×2 inches. It has a power range from 3W to 14W, providing water flow up to 1600 gph. Suitable for both freshwater and saltwater aquariums with a tank thickness of up to 1/2″.

**Note:**

– Please refer to the user manual for installation instructions and settings.

Fish tank wave generator – Hygger Mini

Here are important notes to consider when setting up the wave maker:

Here’s a summary of the features and specifications of the Hygger Mini Powerhead Controller:

Related products

Login